Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® S 3010 MR UN - PSU - BASF

Material Data Center offers the following functions for Ultrason® S 3010 MR UN:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultrason S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 45 cm³/10min ISO 1133
温度 360 °C -
荷重 10 kg -
成形収縮率, 平行 0.7 % ISO 294-4, 2577
成形収縮率, 直角 0.7 % ISO 294-4, 2577
機械的特性単位テスト基準
ISO データ
引張弾性率 2600 MPa ISO 527
降伏応力 75 MPa ISO 527
降伏ひずみ 5.8 % ISO 527
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30゚C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 5.5 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30゚C 6 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 5.5 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 6 kJ/m² ISO 180/1A
温度 -30 °C -
Ball indentation hardness 135 MPa ISO 2039-1
熱的特性単位テスト基準
ISO データ
ガラス転移点, 10゚C/min 187 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 177 °C ISO 75-1/-2
線膨張係数, 平行 53 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.6 mm -
厚さhでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 3.0 mm -
その他の特性.単位テスト基準
吸水率. 0.8 % Sim. to ISO 62
吸湿率 0.3 % Sim. to ISO 62
密度. 1230 kg/m³ ISO 1183
材料特有の特性単位テスト基準
ISO データ
粘度数. 72 cm³/g ISO 307, 1157, 1628
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 130 - 150 °C -
Pre-drying - Time 4 h -
Processing humidity ≤0.02 % -
樹脂温度 330 - 390 °C -
金型温度 120 - 160 °C -
Feed temperature 80 °C -
Maximum residence time 10 min -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
納入形状.
ペレット., ナチュラルカラー
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.